The SharqEdges quick mounting solution makes your operations faster and more flexible by minimizing the time needed to change edges. Any motor grader can be converted to SharqEdges. The solution is based on putting an adaptor plate on the grader mold board or on the plow that makes it possible to quick mount any SharqEdges edge on to it. By converting a grader or plow to SharqEdges, you gain access to a full toolbox of rever-sible edges for all conditions and seasons.
Operating Technique
The SharqEdges operating technique – “Sharqing” - is to run with a selfsharpening edge angle and to cut and lift instead of scrape and push. It takes some training to operate a grader with SharqEdges – but it’s worth it. Grader operators familiar with SharqEdges outperform any operator using traditional thicker blades and techniques. SharqEdges equipped operators slice with the grader, like a knife through butter, achieving results that are truly a cut above the rest.
The principle of SharqEdges is the same as with a razor or with a plane – cut the material with a thin, hard and tough edge in a fixed sharp angle. With new SharqEdges on the grader, sharpen the edge in 55 degrees and get an edge with a knifelike sharpness. When it is sharpened in the front, lift and tilt forward so the sharp edge goes backward to maximum 70 degrees so only the knifelike edge you have made is in contact with material. Stay and run there and cut easily. Take control over the edge. Mold it. Sharpen it. Run it. Care for it. Here the sound. Feel it in the grader. See it on the material flowing on the mold board. Run easily. Feel the flow. And make a great result on the road. That is Sharqing with SharqEdges.
Quick mounting
The ability to switch edges at the roadside in minimal time dramatically increases flexibility and productivity. The system protects the equipment from damage of big hits in manholes etc - the wedge bolts break before vital parts of the machine or plow. All thanks to the use of wedges and wedge bolts – an easy-to-use, very stable fastening system.
• Easy edge switches at the roadside – increases productive time.
• Protects the equipment.
